BUILT TO BE HEARD. BUILT TO STAND OUT.
Bagger Works builds motorcycles with more sound, more presence and more attitude.
From matched Plug & Play audio systems to full custom builds and custom LED lighting, every service is designed around the bike, the rider and how far you want to take it.
Whether you're looking for a straightforward audio upgrade, a high-output multi-speaker system, custom fabrication, air ride, body work or lighting that transforms the entire look of the bike, we build it with one goal in mind:
Make it perform. Make it clean. Make it yours.
Every project starts with a consultation so we can understand your motorcycle, your current setup and what you want from the finished build.
The GOAL is simple:
Better Sound. Clean Work. No Guesswork.
From system design and installation to fabrication and lighting, every detail is approached with the same focus: clean execution, thoughtful integration and a finished result that looks like it belongs on the bike.
READY TO TALK ABOUT YOUR BIKE?
Every Bagger Works project starts with a conversation.
Whether you're looking at Plug & Play audio, a full custom build or custom LED lighting, contact Pauly D directly to discuss your bike, your goals and how far you want to take it.
Pauly D
Phone: 352-232-9409
Email: paul@ultimomarine.com
Call or email for a Bagger Works consultation.
2-Speaker System
Clean. Simple. Loud.
The perfect starting point for riders ready to leave factory sound behind.
Our 2-Speaker Plug & Play System is designed to create a strong front soundstage with better clarity, stronger output and more presence than a factory setup.
Rather than piecing together random components, we configure the system around your motorcycle, existing audio setup and performance goals. That may include properly matched speakers, amplification, wiring, integration components and mounting hardware needed for a clean, organized installation.
This is the ideal entry point for riders who want a real
improvement in sound quality and volume while keeping the system simple and upgrade-friendly.
Representative system components shown. Each Bagger Works Plug & Play package is configured based on the motorcycle, existing equipment and performance goals, so final component selection may vary. Final systems may incorporate full-range speakers, midrange drivers, tweeters and/or subwoofers depending on the motorcycle, available locations and performance goals.
Typical System Components
Matched 2-speaker configuration, with tweeter and/or subwoofer integration where appropriate
Properly matched amplification
Motorcycle-specific wiring and integration
Mounting hardware and adapters as required
Power and ground components where applicable
System configuration based on your motorcycle and existing audio setup
Ideal For
Daily riders, front-stage upgrades and riders who want better sound without building out the entire bike.
4-Speaker System
More Coverage. More Output.
Step up from a front-stage upgrade to a fuller, more balanced sound.
Our 4-Speaker Plug & Play System expands the audio beyond the front of the bike, adding rear speaker coverage for greater output, stronger presence and a more complete listening experience at riding speed.
Rather than simply adding another pair of speakers, we configure the system so the front and rear work together. Speakers, amplification, wiring and integration components are matched around your motorcycle, existing audio setup and performance goals.
The result is a noticeable jump in volume and coverage and overall presence, without moving into a larger multi-speaker build.
Representative system components shown. Each Bagger Works Plug & Play package is configured based on the motorcycle, existing equipment and performance goals, so final component selection may vary. Final systems may incorporate full-range speakers, midrange drivers, tweeters and/or subwoofers depending on the motorcycle, available locations and performance goals.
Typical System Components
Matched 4-speaker configuration, with full-range, midrange, tweeter and/or subwoofer integration as required
Properly matched multi-channel amplification
Front and rear speaker integration
Motorcycle-specific wiring and factory-radio integration
Rear speaker mounting, adapters or lid integration as required
Amplifier mounting hardware
Power and ground components where applicable
System configuration based on your motorcycle and existing audio setup
Riders looking for stronger front-and-rear coverage, increased volume and a fuller overall sound.
Ideal For
6-Speaker System
Built to be Heard.
This is where Plug & Play starts getting serious.
The 6-Speaker System expands the soundstage again, adding greater coverage, projection and output while keeping the system properly matched and organized.
With additional speaker locations working together, the system delivers a fuller listening experience with the presence needed to compete with wind, road and exhaust noise.
It delivers serious performance without requiring a full competition-style custom build.
Representative system components shown. Each Bagger Works Plug & Play package is configured based on the motorcycle, existing equipment and performance goals, so final component selection may vary. Final systems may incorporate full-range speakers, midrange drivers, tweeters and/or subwoofers depending on the motorcycle, available locations and performance goals.
Matched 6-speaker configuration using the appropriate combination of full-range, midrange, tweeter and/or subwoofer components
Properly matched multi-channel amplification
Front and rear speaker integration
Additional speaker location integration
Motorcycle-specific wiring and factory-radio integration
Speaker mounting, adapters or lid/lower integration as required
Amplifier mounting hardware
Power and ground components where applicable
System configuration based on your motorcycle and existing audio setup
Typical System Components
Riders who want greater projection, increased output and a fuller multi-location soundstage built to stay present at riding speed.
Ideal For
8-Speaker System
Maximum Coverage. Serious Output.
This is the top of the Bagger Works Plug & Play lineup.
The 8-Speaker System is designed for riders who want maximum coverage, greater projection and substantially more output across multiple speaker locations.
At this level, the system is no longer just about adding speakers. Proper amplification, wiring, integration, speaker placement and electrical demands all become part of the overall design.
By spreading the sound across multiple areas of the motorcycle, the system creates a larger, more immersive soundstage with the presence needed to stay strong at highway speed.
This is our highest-output Plug & Play configuration before stepping into a fully custom Bagger Works audio build.
Representative system components shown. Each Bagger Works Plug & Play package is configured based on the motorcycle, existing equipment and performance goals, so final component selection may vary. Final systems may incorporate full-range speakers, midrange drivers, tweeters and/or subwoofers depending on the motorcycle, available locations and performance goals.
Typical System Components
Matched 8-speaker configuration using the appropriate combination of full-range, midrange, tweeter and/or subwoofer components
Properly matched multi-channel amplification
Front, rear and additional speaker-location integration
Motorcycle-specific wiring and factory-radio integration
Speaker mounting, adapters, lower-fairing, Tour-Pak or lid integration as required
Amplifier mounting hardware
Power and ground components where applicable
Processor/DSP or integration components where required
System configuration based on your motorcycle, existing audio setup and performance goals
Riders looking for maximum multi-location coverage, serious output and a full-bike soundstage without moving into a complete custom audio build.
Ideal For
Pauly D
Phone: 352-232-9409
Email: paul@ultimomarine.com
Call or email for a Bagger Works consultation.
FULL CUSTOM BUILDS
When Plug & Play Isn't Enough.
Some riders want better sound.
Some want a different bike.
A Bagger Works Full Custom Build goes beyond adding parts. We look at the motorcycle as a complete build —
sound, stance, body, fabrication and the details that bring everything together.
Whether we're transforming an existing bike or taking a build in an entirely new direction, every decision is made around one thing:
The finished bike should look like it was always meant to be that way.
No random parts. No cookie-cutter builds. No half-finished vision.
Built Around Your Bike. Built Around You.
Every full custom project starts with a consultation.
We want to know what you're starting with, how you ride, what you want the bike to become and how far you want to take it.
From there, we plan the build as a complete package so the individual pieces work together from the beginning.
CUSTOM AUDIO
High-output systems, custom speaker locations, fabrication, amplification, DSP integration and tuning.
CUSTOM FABRICATION & BODYWORK
Custom panels, bags, lids, fairings and fabrication designed to become part of the bike — not look bolted onto it.
AIR RIDE & STANCE
Suspension and stance upgrades designed around the look, ride and overall build.
CUSTOM LED LIGHTING
Integrated lighting designed to highlight the build and extend its presence after dark.
Built to Show. Built to Ride.
A custom bike shouldn't stop being a motorcycle. Every Bagger Works build is designed to make an impact standing still — and still make sense when you're riding it.
Pauly D
Phone: 352-232-9409
Email: paul@ultimomarine.com
Call or email for a Bagger Works consultation.
CUSTOM LED LIGHTING
Built to Stand Out After Dark.
Custom lighting should do more than make a bike glow.
Bagger Works LED lighting is designed to work with the lines of the motorcycle, highlight the details that matter and add another layer of presence without looking random or overdone.
Clean when it’s off. Unmistakable when it’s on.
Custom Installation
Wiring and components routed and mounted with the same attention to detail as the rest of the build — clean, serviceable and built to belong on the bike.
Light the Build. Not the Wiring.
A custom lighting system should look intentional from every angle.
The goal is simple: highlight the motorcycle, protect the installation and make the finished bike stand out when the sun goes down.
Every LED lighting project starts with a consultation.
Pauly D
Phone: 352-232-9409
Email: paul@ultimomarine.com
Call or email for a Bagger Works consultation.